English  Français 
The Zoupet is now named the Smart Slider™.
Cart 0

Instructions

How to install the Smart Slider™

 

  • Make sure the frame corner of your screen door is clean and dry on each side;
  • Close the door completely to make sure you stick the Velcro® strips on the frame, but not where it overlaps;
  • If not already done, stick the spiky/male/hook Velcro® strips on the back side of the plates and the soft/female/loop Velcro® strips on the door frame;
  • Make sure the round corner of each plate lies above the screen;
  • Leave the plates in place at least 1 hour to allow the Velcro® strips to stick well.

 

How to install the Smart Slider™ on an embossed frame

  • Use winter insulation tape for windows;
  • Install the Smart Slider™ as shown on above video;
  • Video is four times faster than normal;
  • Door and cat (Shiva) are a courtesy of Chantal from Châteauguay.

 

How to install a Smart Slider™ on a tightly fitting frame

  • Replace Velcro® strips by mounting squares or mounting tape;
  • Note: You will not be able to remove and put back the plates as easily as with Velcro® strips.

 

 How to properly use the Smart Slider™

 

How to temporarily uninstall the Smart Slider™

  • Tear off each plate carefully using both hands.

 

How to clean up the Smart Slider™

  • Tear off each plate carefully using both hands;
  • Wash each plate with warm soapy water and a piece of cloth.

 

How to permanently uninstall the Smart Slider™

  • Tear off each plate carefully using both hands;
  • Carefully remove the Velcro® strips from the frame with both hands;
  • Remove all remaining glue from the frame with a degreaser like WD-40.